配电变压器高、低压侧无熔断器, 有的虽安装跌落式熔断器, 但采用铝丝或铜丝替代熔丝, 致使低压短路或过载时熔丝无法正常熔断而烧毁配电变压器。配电变压器的高、低压熔体配置容量过大, 从而造成配电变压器严重过载时烧毁配电变压器。

由现再的▨(de)民(min)(min)高低压配电品类，大部分买家主要采用两相电输电,随着周期推移人民(min)(min)群众日子平行的的提升，家民(min)(min)高低压配电热器的加剧。特别的是涡流灶、榨破壁机、电饼铛的就会增加，且民(min)(min)高低压配电周期会比较网络化的状况，还有安装中接电任意性和管理工作不不力, 引发高低压配电电力变压器强度不稳定, 长时作业使某相绕阻绝缘带损坏而烧掉。

仍然变配电设𝓀备变电器中的电隔绝胶珠、胶垫腐蚀开裂而促使渗油, 长时刻的程序运行产生电隔绝起霉后其的性能降低而充放虚接, 损毁变(bia♎n)配电设备变电器。

供电供配电电力变压器(q🐠i)(qi)的高、压差大各新线路基本数是由架空线各新线路转化, 致使避雷器投用不立即或如ꦐ果没有按装10 kV 避雷器和压差大避雷器,与避雷器的接地阻值值达不到格的症状， 会导致雷电时过电压保护电流损毁供电供配电电力变压器。

部份配电装置装置盘电压器没配制两级剩的工作工作交流电过程保障措施器( 漏电保障措施器) , 或也许配制了两级保障措施人为因素解散投用, 或伴随接线柱失误造电脑出现问题时没有过程脱扣。当配电𝓰(dian)(dian)(dian)装置装置盘电压器底压侧形成一定接地、两色过压时, 形成远远超出额定负载工作工作交流电20～30 倍的过压工作工作交流电效用在各类高压低压变压器电机绕线上, 电机绕线企业内部将形成高性情温和一定的物理压力, 种物理压力将致使电机绕线解压缩。过压电脑出现问题接除后压力也伴随消散, 电机绕线如何多次重复被物理压力的效用, 其绝缘性胶珠、胶垫等也就会晃动掉落的; 铁心直发板螺柱也会晃动, 各类高压低压变压器电机绕线崎变或迸裂, 最终ꦡ得以致使配电装置装置盘电压器在极快的准确时间内烧断。

跟随着经济社会的转型,公民人们的衣食住行总体水平的提高了。部门台区供电容载在短期间内加大非常快的, 但响应的供电盘装置电压器、供电盘装置柜没得要及时增(ze🦂ng)容, 长久的过容载作业而产生供电盘装置电压器损毁。

高低压变配电电抗器、保护接地装置网的保护接地装置电容值、避雷器等没得按指导书要期参与检查测量耐压试验, 没有尽早出现 主机 的缺陷,主꧃机 长🌳期的带故障开机运行,诱发高低压变配电电抗器损坏。

我们对客户低压线路、设备验收把关不严, 由于工程质量差, 导线每相弧垂相差太大, 大风造成低压短路，低压设备安装不规范等原因烧毁配电变压器。在综合配电变压器容量富裕度不足的情况下，接入临时基建、临时用电负荷的情况，造成过负荷烧毁配变。

电力现在变变供电机检查不完成及检查投资项目不全时，造变变供电变电器长期的缺油电脑运行, 底压层面工作区不切底,造底压层面頻繁保护接地。变变供电室、门、窗脏污不保养, 大雨时变变供电室水进造变变供电(dia🏅n)柜不导通损(su🅠n)坏变变供电变电器。

在配电变压器投运前, 严格安装高、低压熔体, 同时测试负荷情况，分析原因。严格按照《中低压配电网实用技术指导书》中相关规定执行，按负荷情况配置熔体, 但不得超过下列要求:
( 1) 容量在100 kV·A 以上的配电变压器, 配置1.5～2.0 倍额定电流的熔体;
( 2)容量在100 kV·A 以下的配电变压器, 配置2.0～3.0 倍额定电流的熔体;
( 3) 低压侧熔体应按额定电流稍大一点选择。

在电量高峰期来临时, 用钳形工作电流量表对每台供电装置电抗器短路工作电流工作电流量对其实施测量方法, 察觉到供电装置电抗器单相厉害不和平运作, 要正确校准短路工作电流。而对于常期过短路工作电流(l🦹iu)(liu)运作的供电装置电抗器要迅速对其实施增容。客人各线路的架线, 有必要是以相关的技术应用指♛(zhi)导书条件对其实进行施工程项目进行施工, 确保工程项目进行施工的品质, 认真合同履行工程项目竣工验收手读。

在每季度的雷阵雨时间段来袭刚刚, 因对因此安裝在变电变(bi𓄧an)电器上的避雷器去检查测量工具。做好体检地线系统极系统系统系统是否有好, 地线系统极系统系统系统所需的引线可有断股、脱焊、开裂现状。用地线系统极系统系统系统热敏(min)功率电阻器值估测仪检查测量工具地线系统极系统系统系统热敏(min)功率电阻器值: 配变存储空间在100 kV·A 及一下者，其地线系统极系统系统系统热敏(min)功率电阻器值值不恰不超过4 Ω；配变存储空间100 kV·A 一下者，其地线系统极系统系统系统热敏(min)功率电阻器✤(qi)值值不恰不超过10 Ω。按技术规程规定要求对变电变电器去时期性做实验的时候, 方能即使出现处以理的缺陷。

每台配电提升装置配电变压器必须安转一个通过成绩剩余时间瞬时电流运动自我爱护提升装置。在其投用前须做下面的论文检测的工作: ( 1) 带功率因数补偿分、合🉐旋钮3 次, 不宜误动; ( 2) 用校正按纽校正3 次, 应准确运动;( 3) 各相用校正阻值接地装置校正3 次, 应准确运动。在启用中每个试跳1 次, 应准确运动。严令禁止对非高压一个通过成绩漏电自我爱护器撤销启用，若产生跳电错误，应及早先隐患排查表原因，治疗错误，后供电公司。